Squid Lubricity Rating: Difference between revisions
gdb>Cxejes m (→Scoring) |
m (3 revisions imported) |
(No difference)
|
Latest revision as of 15:05, 28 May 2023
Introduction
Scoring
Currently our rating system works on a scale of 0-100 and is based on time-aggregated data from up to 5 categories: Scar Size, Operating Temperature, Required Power, Maximum Running Load, and Maximum Starting Load.
The equation for all scoring works as follows:
Where:
- P = Points
- i = "Ideal" result
- c = Category
- R = Scalar
- and 100 is the point offset (a maximum of 100 points available)
The 5 categories have a different scalar (R) to determine their scoring curve.
R_c values are:
- Scar Size = 1.5
- Operating Temperature = 0.01
- Required Power = 0.2
- Maximum Running Load = 0.08
- Maximum Starting Load = 0.25
i_c values are:
- Scar Size = 1.0 mm (all scores below 1.0 mm receive 100 pts.)
- Operating Temperature = 260' F
- Required Power = 25 W (all scores below 20 W receive 100 pts.)
- Maximum Running Load = 8,333 kg/cm^2; 120,000 psi (all scores above 120,000 psi receive 100 pts.)
- Maximum Starting Load = 1,406 kg/cm^2; 20,000 psi (all scores above 20,000 psi receive 100 pts.)
Why Pounds per Square Inch (psi) when other measurements are metric? Similarly to Fahrenheit, psi has more convenient scaling for our uses than kg/cm^2 (kilograms per square centimeter). Numbers will be offered in both formats as often as possible.
The final point score is calculated using the following equation:
Where:
- P = Points
- W = Weighting value
- c = Category
- n = Variation number
- t = Total
- a = refers to the category number. SLR-3 having 4 total scoring categories.
SLR-2
SLR-2 has been replaced by SLR-3.
SLR-2 used 3 categories for scoring: Scar Size, Operating Temperature, and Required Power.
The weighting values for SLR-2 are:
- Scar Size = 1.2
- Operating Temperature = 1.0
- Required Power = .8
SLR-3
In SRL-3, the weighting values are:
- Scar Size = 1.2
- Operating Temperature = 1.2
- Required Power = .9
- Maximum Running Load = .8
SLR-4
In SRL-4, the weighting values are:
- Scar Size = 1.2
- Operating Temperature = 1.2
- Required Power = .9
- Maximum Running Load = .8
- Maximum Starting Load = 1.1